Sunricher DALI Professional 75W 24V Constant Current DALI DT6 Driver

Price:   $336.99

  • Model: SRP230575CCF
  • Shipping Weight: 0.25kg
  • 20000 Units in Stock

(0 reviews)
(complete orders today,deliverd around 26/11/2024)
  • Shipping time
    About 2-3 days.
  • means of transportation
    EMS,TNT,UPS,DHL,FEDX,HK AIR
  • Payment
    Paypal,Western Union
  • Email us
    Sales@ledstripbulbs.com
New Products
5mm Yellow LED - 590 nm - T1 3/4 LED w/ 45 Degree Viewing Angle
$0.18
5mm Green LED - 525 nm - T1 3/4 LED w/ 45 Degree Viewing Angle
$0.49
5mm Yellow LED - 593 nm - T1 3/4 LED w/ 15 Degree Viewing Angle
$0.19
3mm Amber LED - 605nm - T1 Through Hole LED w/ 15 Degree Viewing Angle
$0.16
  • Details
  • Reviews
  • Tags
  • FAQ

This DALI Protocol (Digital Addressable Lighting Interface) LED Driver features an adjustable output to control Single-colour, Dual-colour (CCT), Tri-Colour (RGB) or Quad-colour (RGBW) constant current LED Lights.

This highly versatile, professional DALI DT6 Driver from our Sunricher range of lighting control products can be adjusted using the onboard menu buttons and digital display. These allow you to set the appropriate number of DALI addresses depending on how many output channels on the driver are required. The DALI Addresses can also be set automatically from the DALI Master Software as required.

The dimming curve on this control gear is Logarithmic and the dimming method is PWM (Pulse Width Modulation). Built-in safety features ensure that should the unit encounter a Short Circuit, Over Load, or Over Temperature fault, the driver will reset once the fault has been removed.

Using DALI DT6 protocols the DALI Driver is compatible with all DALI 2 products. A useful "PUSH DIM" function that will dim your products using a momentary switch can also be found on this product.

Also featured on the driver is a memory function when using the in-PUSH DIM mode that will set the unit to come back on using the last dimming level set on the PUSH Dimmer.

Note: The Driver will work in PUSH DIM mode or DALI mode, you cannot use DALI when using the PUSH DIM facility.

The power input connection is 200V to 240V AC, 50/60Hz so you will need to connect the driver to a mains power supply, and then connect the constant current LED product you want to control and then set the required current value using the DIP switches.

After the above steps, set the required channel addresses using the display and menu buttons. All that is then required is the connection to the DALI BUS line.

Important Note: Please ensure the mains supply to the driver is powered off while you adjust the settings on the driver.

For further information on this and our other professional control products, please contact our technical sales team by phone, email, WhatsApp or Live Chat through our website.

 

Technical Specification
Product Code:    SRP230575CCF
Product Packed:    Gift box
Product Type:    Controller / Driver
Colour:    White
IP Rating:    IP20 Non-Waterproof
Guarantee Period:    5 Years
Wattage:    75W
Input Voltage:    200V - 240V AC
Output Voltage:    8V-48V
Output Current:    300mA - 1500mA
Connectivity:    DALI protocols
Size:    244 x 64 x 32mm
Dimmable:    Yes
Power Factor >:    0.9
Voltage Type:    Constant Current
Adjustable Dimming Curve & Gamma Value:    Yes
Adjustable PWM:    No
Relative Humidity:    10% - 95%
DALI Channels:    1, 2, 3 and 4 Channel Adjustable
RDM:    Not Applicable
Input Voltage Range:    200V - 240V AC
Leakage Current:    0.5mA/230V AC
Short Circuit:    Yes recovers automatically after fault removed
Over Load    Yes recovers automatically after fault removed
Working Temperature:    -20 to +45ºC
Working Humidity:    10% to 95% Rh Non-condensing
Storage Temperature:    -40 to +80ºC 10% to 95% RH
Operating Temp:    0-40°C

Similar Products