DS series 12 Channel DMX512 and RDM Decoder converts DMX and RDM signals to PWM for single color, CCT and/or RGB LED lighting products. It features both DMX decoder and master functions that are easy to switch between. RDM bi-direction communication enables the DMX console to detect and display decoder information and set DMX addresses. With a total of 12 channels, it allows a max of 5A and 120W per channel for controlling larger projects.
Selectable 16bit (65536 levels) or 8bit (256 levels) grey levels customize the smoothness of color fades. Choose between 4 PWM frequencies, with a maximum of 8000Hz to reduce flicker and enhance quality for audiovisual applications. Settings and features are easily accessible with OLED display menus and operated with 4 control buttons. 3-pin XLR, RJ45 and green terminal DMX interface with photoelectric isolation and signal amplifier function improves signal transmission efficiency and anti-interference. Common anode screw-down terminals for connection to LED light strips or fixtures. Stand alone function allows for easy testing, as well as control of RGB LEDs when no DMX signal is present. This feature includes 10 built-in RGB programs with adjustable speed and brightness levels.
Product Details:
Easy operation with OLED display and 4 buttons
PWM frequency 250/500/2000/8000Hz selectable
16bit (65536 levels) /8bit (256 levels) grey level selectable
Output dimming curve gamma value 0.1-9.9 selectable
Protects against: over-heat, over-load, short circuit
1-12 channel configuration
Max load current: 60.5A
3-pin XLR, RJ45 and green terminal DMX interface with photoelectric isolation and signal amplifier
DMX address selection OLED display
60W at 12V or 120W at 24V
Rated IP20 for dry locations
RoHs, CE certificate, FCC
5 year warranty
Specifications
Amps per Channel： 5 Amps/CH
Channels： 12 Channels
Control Mode： RGB, CCT, DIM
Remote： DMX
Dimensions： 9.7" x 4.57" x 1.55"
Dimming Curve： gamma 0.1-9.9, linear, log
DMX In/Out： 3 pin XLR, RJ45, Screw Terminals
Input Signal： DMX512/RDM
Input Voltage Range： 12-24 VDC
IP Rating： Non-Waterproof IP20
Max Input Current： 60.5 A
Max Output Wattage： 60–120 W / channel (depending on voltage)
Operating Temperature： -30~+55 °C (-22~+131 °F)
Output Current： 5 A x 12 CH, max 60 A
Product Weight： 1lb 15oz (0.88kg)
PWM Adjustment： 250Hz, 500Hz, 2KHz, 8KHz
Resolution： 8 bit, 16 bit
Standards And Certifications： CE, FCC, RoHS Compliant
Volts： 12~24 VDC
Package Weight: 2lb 1.5oz (0.95kg)
Package Dimensions: 10" (25cm) x 4.75" (12cm) x 1.75" (4cm)
All specifications are subject to change without notice.
Accepted Forms of Payment
Credit Card 
We accept Visa, MasterCard, Discover and American Express. Credit card information is never stored anywhere on our premises or online server. Credit card information is transmitted securely using 256-bit encryption.
PayPal 
Select "PayPal" on the order form. Your order will not be processed or shipped until payment is received and verified. You will not be able to modify your order once it has been submitted.
Shipping
If you placed an order and want to know its status, please check your email for tracking information. If you need assistance, send us an email (ledstripcabinet@gmail.com), and make sure "Order Status" is selected in the inquiry drop-down.
We make every effort to ship all orders within 24 hours.
Same-day shipping if order is placed by 3 p.m. CDT.
Next-day shipping (excluding weekends) if order is placed after 3 p.m. CDT.
Monday shipping if order is placed on the weekend.
**An email is sent to confirm that your order has been received and is being processed. Another email will be sent to you with tracking information when your order ships.
Overnight & 2-Day Shipping/Saturday Delivery
Overnight and 2-day shipping options are only available to destinations within the USA. Shipments are sent via UPS and are delivered in 1-2 business days (not weekends).
Returns and Exchanges
We have a hassle-free 30-day return policy.
Warranty
All LED Products: 2-Year Replacement Limited Warranty
LED Strip Cabinet carries a minimum 2-year limited warranty on all LED products for manufacturing defects or product failures. Select products may carry more than a 2-year warranty, which will be documented on the product page. If you experience an issue with a product, a technician from our support team may be able to diagnose the issue. Technical support is available by phone, chat and email. The warranty is valid and only applies when LED Strip Cabinet products are properly used for their intended applications.
Lifetime Warranty
Select Products: Limited Lifetime Warranty
LED Strip Cabinet, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If an LED or other internal component fails, return the product to LED Strip Cabinet, Inc. for inspection. If, after inspection, LED Strip Cabinet verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a product of equal value may be substituted. Warranties are non-transferable. Warranty terms and policies are subject to change without notice.
Frequently Asked Questions
Q: What is the importance of UL Listed?
UL is an acronym for the Underwriters Laboratories. They are an independent product safety certification organization. A good summary used by UL is, "a not-for-profit organization dedicated to public safety." This means you can install these LEDs in commercial spaces, industrial applications, and in your home with peace of mind.
Q: What is the product warranty?
We’re so happy with the quality of our product, we offer a 5-year warranty on all of our LED strips to all of our clients. The warranty on power supplies ranges from 2 to 7 years which is model dependent.
Q: What is the lifespan of your strip lights?
Our lights have been rigorously tested and have an expected lifespan of 50,000 hours before dropping to 70% luminosity. This means that if you were to use your lights 12 hours a day, every day, the lights would be expected to last longer than 10 years. Even after that time has elapsed, the lights will maintain a brightness of 70%. Higher-output strips require a heat sink to reach the expected lifespan and beyond.
Q: What is color temperature?
The color of light can be quantified by referring to its color temperature. White light is measured in Kelvins (K). Most white lights fall in a spectrum between 1800K and 6200K. When getting close to 3000K, the light is noticeably warmer. On the other end of the spectrum, the lights have a blue-ish tint and cooler tone when nearing 6500K.
Q: Which color temperature should I choose?
Choosing the correct color temperature lights for your project is very important, and as important as the brightness you choose. Consider the look and feel you want your project to have. What other color lights will be present? What material and color are the materials you wish to light? We can help you choose!
Q:What are lumens (lm)?
This is a quantifiable amount of light produced by an LED strip or other light-producing product. This is one way we can measure light output.
